修理を始めるには コミュニティ ストア

2.5GHzデュアルコアIntel Core i5プロセッサ（Turbo Boost使用時最大3.1GHz）、3MB共有三次キャッシュ

265回答 すべてを表示

オプション

MacBook Pro 13'' late 2012 does not charge after water damage

Hi,

I spilled water on my macbook and now it doesn’t charge. However is does work when plugged in. I took it apart and cleaned everything. I noticed that the water damage indicator on the magsafe port pcb is red. I am wondering will replacing this part help? My guess is if it was broken the motherboard would not receive any power at all. Whereas now it is working from the wall.

Thanks for the answer.

UPDATE:

I was able to take it apart again and clean it with alcohol thoroughly and now it is charging. See screenshot below

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション

The water damaged your logic board and/or the battery its self. Lets see if we can get a better idea what needs repairs, install this gem of an app CoconutBattery take a snapshot of the main window and post it here for us to see iFixitでの質問に画像を追加する方法

In addition lets run the onboard diagnostics, restart your system and press the D key let us know what the error message that comes up.

Update (06/08/2020)

OK, you are on borrowed time with your battery! You have 1105 cycles while the battery is only designed at best to go to 1000 Determine battery cycle count for Mac notebooks

Lets give that a try first! Here’s the needed part MacBook Pro 13" Retina (Late 2012-Early 2013) Battery and here’s the guide to put it in MacBook Pro 13インチ Retina Display Late 2012 バッテリーの交換.

After you have let the system charge is it working better?

MacBook Pro 13" Retina (Late 2012-Early 2013) Batteryの画像

製品

MacBook Pro 13" Retina (Late 2012-Early 2013) Battery

$99.99

MacBook Pro 13" Retina Display Late 2012 バッテリーの画像

ガイド

MacBook Pro 13インチ Retina Display Late 2012 バッテリーの交換

難易度：

難しい

—

30 minutes - 2 hours
iFixitの画像

ガイド

iFixitでの質問に画像を追加する方法

難易度：

とても簡単

—

2 - 5 minutes

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

3 件のコメント:

Hi,

Thanks for your answer. I took it apart one more time and did a more thorough cleaning of the whole logic board with alcohol and that did the trick. Now it is charging. Howerver it says that it is charging with ~22 watts. it fluctuates between 20 and 29 watts. Is that normal?

Screenshot attached.

Thank you very much,

Abe

さんによる

@abrorhon - Don't see the screenshots? Once in the media tool bar you need to insert it.

The charging rate is dependent on the batteries temp and the level of charge it needs. Basically, its linear and is lowered when the temp of the battery is too warm.

さんによる

@danj Hi Dan,

Screenshot should be up now. Thanks for your help.

さんによる

コメントを追加

回答を追加する

abrorhon.ahmedov さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 37