メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

iPad Miniは7.9 インチのディスプレイで、容量は16、32、64 GBがあります。

769の回答 すべてを表示

My Ipad Mini touch isnt working after I replaced my digitizer?

After i plugged in the Battery, LCD, and new Battery, the screen opens and all the buttons work, but i cant use the touch screen. I looked at the connector but nothing seems to be broken.

So I had cracked my iPad a few years ago and recently decided to fix the screen, before i unplugged the LCD, Battery, and old digitizer everything was working just fine, but now when after i plugged in the Battery, LCD, and new Battery, the screen opens and all the buttons work, but i cant use the touch screen.

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

今あるものを使い続けましょう

オールインワインキットで安く修理して、節約しましょう。

iPhone 修理キットを見る

今あるものを使い続けましょう

オールインワインキットで安く修理して、節約しましょう。

iPhone 修理キットを見る

2件の回答

選択されたソリューション

Did you disconnect the battery before you disconnected the digitizer and LCD and didn't reconnect the battery until you connected the LCD and digitizer? You can damage the motherboard if you unhook these parts reconnect them while the battery is connected. You can also check the connections for damage with a magnifying glass and clean the connectors with a qtip and alcohol and a soft brush.

Update (05/24/2020)

You can still check the connections and clean them but first disconnect the battery and don't reconnect the battery before the. lcd and digitizer if that doesn't fix it I would recommend taking it to a repair shop, it will probably need a filter or another part replaced on the motherboard. It has to be done with microsoldering.

この回答は役に立ちましたか?

スコア 0

コメント:

I didn't disconnect the battery first, i didnt know. Do you think the Ipad can still work? Everything works except for the fact that i cant move anything.

さんによる

コメントを追加

Either one or more pins are missing on the digitizer connector on the main board less likely as you’ve already checked or the digitizer has become faulty after re-opening.

Most likely from either a tear in the cable or crushing the digitizer cable between the glass and the housing when closing it again. There is a part of the cable that needs to be folded inwards before closing or the cable will get damaged.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Casey Joe さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 18