修理を始めるには コミュニティ ストア

AppleのPad 6のWi-Fiのみのモデルは2018年3月に発売されました。32GBと128GBの容量オプションがあります。9.7インチRetina ディスプレイと64ビットA10 fusionチップを搭載しています。

150回答 すべてを表示

オプション

Can I get touch ID on another genuine apple button?

I have an ipad 6, however the home button cable is torn. I was wondering if it was possible to transfer over the BGA chip under the metal cover on the ribbon cable to another genuine apple home button and restore touch ID functionality. I know that on the 6s this is not possible as this is all built into the button itself, but as this is a completely different design, i was wondering if this would work. Thanks

Edit: i have added 3 photos, these show the chips i am referring to, another to show what we are looking at from a distance

Block Image

Block Image

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

From what I see, the sensor/controller chip seem to be the one adhered to the back of the button itself. You have to keep the button to get Touch ID.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

From what i see, there are 3 chips that could possibly be transferred to a new button. As you can see in the photos i have now added, i have removed the metal cover. The large shiny chip is one which i think could hold the solution. The other would be the chip that is under the hot glue type stuff. Upon further inspection, i noted that there is a chip on the back of the button itself, also covered by hot glue type stuff. has anyone tried transferring either of these 3 chips to restore touch id functionality?

さんによる

コメントを追加

回答を追加する

Brodie Haward さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 45