修理を始めるには コミュニティ ストア

A personal computer that resides in one location with its core components inside a case separate to third-party peripherals required for operation, such as a mouse, keyboard, and monitor.

542回答 すべてを表示

オプション

Hard Drive isn't working after replacing my PSU?

Today my 1080TI came in the mail, and I installed a 750W EVGA PSU as well. When I boot up, I get an error message, and I realized this is because my hard drive isn’t working (which is where Windows is installed). I have checked my system and my SSD appears, but the HDD does not register to the computer. I can’t even use my PC, since I don’t have an OS. Please help me figure out how to get my HDD working, one thing I have heard is that it can get fried if you use the same cables from the old PSU, but I’m hoping this isn’t what it is.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順
最も参考になった回答

オプション

It sounds like the +12V is missing. Make sure the voltage setting is correct, and re-check your connections.

If you have a meter, probe the power connector to the hard drive, with negative on the chassis (or a black wire). You should have +12V DC on the yellow wire, and +5V DC on the red.

Bottom line if it’s missing, either the power supply is bad, or shorted out.

このアンサーは役に立ちましたか？

はい いいえ
スコア 2

1件のコメント:

Hi,

To add to the answer, use the paperclip test to check that all the voltages from the PSU are OK.

さんによる

コメントを追加

回答を追加する

Garrison Bates さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 387