I asked this a few days ago but I thought I’d reword it and see if I get more responses.
I tried fixing this one s that had a “broken” power supply. I took it out and put a working supply in and it still wouldn’t turn on. I then put the original “broken” PSU in my other xbox and that PSU worked?? Both PSUs work but when I try putting them in this xbox it doesn’t work. What’s wrong with it?
この質問は役に立ちましたか？
評価: 159.7千
11
191
368
Check the two pins from the power supply connector on the board with a digital multimeter if they are shorted to ground they will cause this problem.
To test whether or not there is a short with multi-meter probes you put the red probe in one hold and the black probe in the other. Put it in resistance / ohms mode and if there is like 0 ohms which will cause the multi-meter to beep depending on the mode you put it in there is a short circuit to ground which is caused by one or more bad components on the board. It’ll be located almost always near the VRMs (Voltage Regulator Modules) which are a set of components used to provide power to the processor and other parts of the board from the power supply.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 1
今までの合計 34
