評価: 13
1
My friend has a flat iron that seems to have a burn resistor its a CROC 1.5 inch Classic Turbo ion Infrared. I have some pictures but i cant seem to find the right resistor. from what i can tell the colors are black,white,Gray/silver (not sure),Brown i think.
評価: 781.6千
1.1千
893
2.3千
Lets go with what you think
black,white,Gray/silver (not sure),Brown i think.
We go to start from the left
Brown =1
Gray/silver=8
white = 9
black = 1 (that is the multiplier).
So that would give you a 189 ohm resistor
If the last one is brown instead of black the multiplier change to x10 thus 1890ohm
I’d go with a 200 ohm and see if it lasts. If that one goes up in smoke go with a 2k
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 1
今までの合計 151
