メインコンテンツにスキップ

1.83、2.0、2.1、 2.16、2.2、または2.4 GHzのいずれかのCore 2 Duoプロセッサーを搭載したModel A1181

1203回答 すべてを表示

Goes into sleep mode upon boot-up, following spill recovery

Well, I spilled about 2 ounces of tea on my MacBook (in the upper left-hand corner where the chips are) - and it went dead in about 6 seconds, before I could grab and turn it upside down. I disassembled, removed RAM and blotted up the few drops of moisture I could find, blow-dried it, and let in sit 24hrs in open air. I then reassembled.

On AC power, with a full-charged battery, I get to the chime-tone, and see the OS X box with the loader bar, then the screen goes dark and power light blinks, apparently going into sleep mode. If I hit the spacebar, the DVD drive makes the normal sound and the power light stays on for a few seconds, then goes back to sleep mode. (The screen stays dark.)

Where is the sensor that puts the system to sleep? Might this be shorting out? Any other thoughts? Thanks in advance!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

2件の回答

ベストアンサー

See

this post with the same problem.

Remember to return and mark accepted the answer that best solves your problem.

Good luck,

N

このアンサーは役に立ちましたか?

スコア 1
コメントを追加
最も参考になった回答

Try running the Apple Hardware Test.

このアンサーは役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

Bill さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,945