メインコンテンツにスキップ

iPhoneの第2世代モデル。モデル番号はA1241 / 8 もしくは16 GBの容量/ ブラックもしくはホワイトのプラスチック製背面ケース。修理はオリジナルiPhoneに比べて直接パーツに作業ができます。ドライバー、こじ開けるためのツールと吸盤カップが必要です。

1158回答 すべてを表示

Two screws not coming loose on side of iPhone?

I have tried unscrewing two of the Iphone 3g screws that are located on the side (under the tape) Nothing I seem to do will make these screws come out. The phone got wet a while back and I feel like they must've rusted in place. I cracked my screen and all I have to do to replace it is get these two screws off! Any advice would be wonderful.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Being very careful to not damage the Display LCD, gently tap with small hard object the metal frame where the screws are to help loosen them up. Go slowly and start very gently, do not damage the Display LCD which is very delicate. Do not strip the screw heads or that will be your next problem.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

arod0120 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,159