メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

Apple Watch Series 2は2016年9月7日に発表され、同年9月16日に発売されました。

100の回答 すべてを表示

Apple Pay not working after screen replacement

Hi!


I replaced a screen on my Series 2 and now I can’t add any card to Apple Pay. I get a “Can’t set up Apple Pay” message with no additional info. All the flex cables are connected and I factory reset the Watch after screen replacement. I’m not sure if Apple implemented NFC lock (when you have to transfer NFC chip from the old screen to the new one) on Series 2 or it’s just a software bug. The screen I used comes from another S2 Apple Watch with fully functional Apple Pay (with this very screen).

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

There are issues, and yes they are usually fixed by transferring the NFC chip from the old display to the new one. iFixit also states (at the beginning of this guide: Apple Watch Series 2 スクリーンの交換):

Replacing the display can cause issues with Apple Pay. If possible, to reduce the likelihood of problems, delete all your ApplePay account info before the replacement, and then re-enter it with the new display installed.

Could be worth a shot as well, I’ve never tried it.

This was a Series 2 specific issue. I believe the NFC chip on the Series 3 and newer is a part of the main board, probably for this reason.

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Nikki さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 17

過去 30 日: 51

今までの合計 266