評価: 133
4
9
I have an iPhone 8 Plus that I replaced the screen on last Thursday. Everything was working fine when I gave it back to the customer. Customer came back in today and said the home button stopped working over the weekend. The screens are Mobile Sentrix XO5 aftermarket. Tried Reinstalling that original screen with the home button, still nothing. I am in the process of doing a restore. Any suggestions or similar problems you have faced?
評価: 50.7千
8
14
101
This problem usually occurs from a small tear in the home button flex from the screen. But you have tried another screen so have ruled out the screen flex. This leads us to the home button assembly itself. You will probably need to put the home button assemble under a microscope and see if you can find the fault, it may be a small tear in the flex, damaged trace on the connector or the turtle IC Either way they are not easy to repair.
It seems strange that the problem did not occur straight away after the screen change. I would also make sure it is getting power to the connector.
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 1
今までの合計 89
