修理を始めるには コミュニティ ストア

13インチアルミ製Unibody, 2.0 or 2.4 GHz Core 2 デュオプロセッサモデルです。

574回答 すべてを表示

オプション

MacBook is killing the MagSafe chargers?

I’ve seen this has been asked before but people say it’s a problem with the house electric but it’s not. I live in a brand new house & i’ve been using my MacBook plugged into the same outlet for 3 years.

there have been times when I’ve bumped the MagSafe magnet or the computer and the whole thing just instantly turned off. It always would start right up again. Yesterday, I very lightly bumped the computer and now the MagSafe charger won’t provide any power to the MacBook. The brick sounds like it always does when I put it to my ear, but now doesn’t charge.

So I had a spare and used it today. Charges the computer just fine until I bumped it again and the same thing; brick is dead. They are both apple chargers I’ve purchased at the apple store.

Any ideas what to fix? I noticed some type of plastic that seems to be peeling out of where the chord plugs into on the MacBook.

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

You might have something loose or damaged that gets shorted inside with just a little bumping. Killing genuine magsafe chargers is quite a task, not easy to achieve. I’ve got a couple of chargers I use for testing that have been plugged to all sorts of damaged boards and they’re still alive and working, the most I’ve seen is them going into protection mode and restarting after 5 minutes unplugged. You should try open up your Mac for an inspection and see if you can find anything out of place to start with. Procedure would be the same as a board replacement, you can use this guide to help you with disassembly:

MacBook Unibody Model A1278 Logic Board Replacement

このアンサーは役に立ちましたか？

はい いいえ
スコア 3
コメントを追加
最も参考になった回答

オプション

I’d replace the mag-safe board (cheap) and your first suspect.

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

MacBook Pro Unibody 13" and 15" MagSafe DC-In Boardの画像

製品

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

$9.99

このアンサーは役に立ちましたか？

はい いいえ
スコア 5

5 件のコメント:

Thank you for suggesting that. I saw it on the logic board replacement tutorial above. I’m wondering if I can use one from my sisters dead MacBook Pro 13 inch. Hers is an A1278 also. Same processor actually even though hers is a 2012 MacBook Pro.

さんによる

It should be compatible. Check to part numbers on the board, they should be the same.

さんによる

Dang the they actually have different part numbers the part number for the unibody is 820-2361–a and the part number for the MacBook Pro is 820-2565- a. They are different prices on this website too

さんによる

Well i think the only difference was the screw holes. so I put it in and seems to work fine.

さんによる

Apple Part #:

661-4950, 922-4950, 661-5217, 922-9288, 661-5235 , 922-9307

Manufacturer Part #:

820-2361-A, 820-2565-A, 069-6153-B, 820-2565

https://www.powerbookmedic.com/Magsafe-D...

さんによる

コメントを追加

回答を追加する

Nicholas さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 348