メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

The Xbox One X (Model 1787) is Microsoft's latest high-powered game console, succeeding the Xbox One S. The Xbox One X was released on November 7th, 2017.

71の回答 すべてを表示

New Optical Drive buzzing sound not reading (video)

Hello everyone! So I’ve had a ton of problems with this Xbox One X. It’s been out of service 6 of the 9 months I’ve owned it. Since then I’ve had to replace the Fan / Thermal Paste (Wasn’t conducting and was hard as a rock) / Retimer Chip.

I just sent it to @tronicsfix who replaced the retimer chip for me. But now it won’t read disks. The optical drive made a terrible grinding sound and wouldn’t take disks. So I ordered a brand new, tested and working replacement drive. I swapped daughterboards and resoldered the red and black wire. This brand new drive now takes and ejects disks like normal. But makes a buzzing sound and does not read them. I tried opening the BluRay app and it gave me an error and dropped me back to the dashboard. Anyone know what’s going on here?

I recorded a video of what the disk drive is doing and it shows the slider almost not want to move.

[ YOUTUBE VIDEO ]

https://youtu.be/Zht4BwXZR6Q

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

Nintendo Switch 修理キット

ゲームを再開するための、早くて簡単な修理キット

Switch 修理キットページへ

Nintendo Switch 修理キット

ゲームを再開するための、早くて簡単な修理キット

Switch 修理キットページへ

1 件の回答

Hard Drive have mechanical parts so the hard drive is making the terrible grinding noise so it is normal for the hard drive to make a grinding or buzzing noise but it not reading stuff is not normal maybe send it to a other repair shop also what error are you getting on your xbox hope to see a response soon :)@wmerzlak

この回答は役に立ちましたか?

スコア 0

コメント:

@pencetenmosioc Just to add, It's regarding the disk drive, not the harddrive.

Anyway, if the drive is making a horrible sound like that, is most of the time that the laser is unable to move. The worm gear/motor is working, but the laser "leans" on it with a white tab (different for each drive) and is unable to move, so it won't read anything... The worm gear/motor and the tab should be lightly creased (this is from factory already there) and some drives have a little tiny screw next to laser to adjust it, so it can move freely too. You should check it out... If you open the drive, carefully pull the laser unit forth and back (do NOT touch the laser) just to check if it can move freely. If yes, it should be good. If not (or you need to use force) it's no good and you should check why it's not moving. Hopefully this helps.. If you still have warranty on the drive, I would return it.

さんによる

コメントを追加

回答を追加する

Will Merzlak さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 39