メインコンテンツにスキップ

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

1041回答 すべてを表示

Connector/logic board fried after lcd screen replacement

With lack of knowledge i replaced a third party lcd screen with my old broken one without moving the battery first. When connecting the wide connector closest to the top, it smelled burnt. It does not display anything. Which parts are possibly damaged, and what needs to be replaced? Is it the logic board or the screen?

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

I can post pictures when i have access to the phone, i will test it with itunes as soon as possible

さんによる

コメントを追加

1 件の回答

ベストアンサー

Backlight filter at the very least has blown which is a component soldered on the board right near the screen connector.

A reputable phone repair store that does board repairs can replace this component. You may be able to find someone locally that offers this service. These repairs generally start from $80.

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

Thanks for answering. I will check out the backlight part. Does this prevent all signals to the lcd screen? Is it possible for me to attempt a repair by my self? I do have the tools neccessary, although limited knowledge

さんによる

The backlight filter is connected to the screen's backlight power.

That filter ends up acting as the fuse as that always ends up being blown when the backlight pin and ground are shorted together which happens a lot when connecting the screen with the battery connected.

You should still see an image on the screen, but very dim with a flashlight shining on the screen.

さんによる

コメントを追加

回答を追加する

Jonas Hjulstad さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 1,410