メインコンテンツにスキップ

Repair guides and support for your Philips TV.

242回答 すべてを表示

Backlight Inverters: master/slave; should both be replaced?

Philips 47PFL7432D/37 suddenly started to flicker and go dark on one side only. Symptoms point to backlight inverter. TV has master and slave inverters; by location seem to be associated with sides of screen. As a rule (general or specific), should both inverter boards be replaced if it seems that only one is failing?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

最も参考になった回答

Mike Pepper  my rule of thumb is that when one fails the other one is most likely right behind. Always do a visual check for any burned, charred or missing components. If you have one of those issues on either one of the inverters, replace only the one with the failure.

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

Thanks very much, for both bits of advice.

No overt damage or missing parts, so onward to find the parts. Thanks again for your quick and to-the-point reply.

さんによる

コメントを追加

回答を追加する

Mike Pepper さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 190