Replace WD 500G Harddrive by WD 1T, Fan running at full speed

Question

iMac Intel 21.5インチ EMC 2308

モデル番号A1311 / Late 2009 / 3.06 or 3.33 GHz Core 2 Duoプロセッサ

310回答すべてを表示

brian lin @brianlin

評価: 1

1

投稿日: 2011年7月18日

オプション

Replace WD 500G Harddrive by WD 1T, Fan running at full speed

I replaced original 500G WD hard drive by a 1T WD blue caviar hard drive (Model no WD10EALX). I put the thermal sensor back but the fan running at full speed. I am wondering if I put the thermal sensor back correctly. I followed the instruction to put it back where near the SATA connector.

Is that compatibility issue? Does any one has the picture or detail of the thermal sensor orientation that I can reference to put it back correctly

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア -1

コメントを追加

2件の回答

ベストアンサー

mayer @mayer

評価: 685.3千

MacHale Enterprises

3.4千

1.1千

2.6千

投稿日: 2011年7月18日

オプション

Apple has changed the standard four-wire SATA power connector for the new iMac's internal drive to a proprietary seven-wire config. removing this drive from the system, or even from that bay itself, causes the machine’s hard drive fans to spin at maximum speed and replacing the drive with any non-Apple original drive will result in the iMac failing the Apple Hardware Test (AHT). In short, the Apple-branded main hard drive cannot be moved, removed or replaced.

Of course there is a lot of ongoing research to resolve this problem. HardDrive Fan Control may be one option.

http://www.hddfancontrol.com/

Stay tuned, the cry from loyal Mac users to this high handed dilemma created by Apple will have ramifications.

Here'

s more on the issue: http://blog.macsales.com/10206-further-e...

http://www.theregister.co.uk/2011/05/14/...

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

コメントを追加