修理を始めるには コミュニティ ストア

The first iteration of Studio Beats headphones were manufactured by Monster in 2008. They are available in a large variety of colors. Screwdrivers, plastic opening tools, and possibly a soldering kit may be required for repair of this device.

41回答 すべてを表示

オプション

Bought 2 new speakers , left one isn't working even after replacement

Block Image

Block Image

Block Image

Block Image

I bought 2 new speakers , right one is working , left one isn't working I've soldered it correctly what could be the issue ? The wires around the headset are fine , slightly worn and torn but no real damage ,its the side with the headphone port , could the port be the issue ? really dont know what can be done? What could be the issue ?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 1
コメントを追加

1 件の回答

フィルタ：
参考になった順 新しい順 古い順

オプション
  1. Check speaker sound balance, might be turned all the way to the right or left.
  2. Use an ohm meter and check continuity on the wires, might be broken internally. If you don’t have an ohm meter, then use the other set of wires that proved to work the “good” speaker and now check the non-functioning speaker on the same channel that made sound.

このアンサーは役に立ちましたか？

はい いいえ
スコア 0

1件のコメント:

How do you check the sound balance ? Is it the device its connected to eg. A mobile phone, if it is then no it cant be the sound balance can it ?

I used the right speaker wires on this left speaker and it worked so I doubt the speakers are the issue ? As I switched to see if the speaker may be at fault

さんによる

コメントを追加

回答を追加する

Navy さん、ありがとうございました！
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 223