メインコンテンツにスキップ

2015 Retina MacBook Airの修理情報とガイド。モデル番号はA1534

281回答 すべてを表示

replace plastic strip with MacBook logo?

The black plastic strip at the bottom of the Retina display is damaged, just by the left hinge. I need a new strip. How do I remove the old one, and where can I get a new one? Display works fine.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

You will need to warm up gently the glass being careful not to damage the screen, provide some protection. As it fits very tight in its slot a very thin metal spatula such as those used for painting that are relatively easy to get and quite cheap will help. You’ll need to lift up the strip rather than sliding anything under it as you have screen flexes running under that and the risk of damaging screen for good is quite high. An acrylic replacement can be found on eBay and probably Aliexpress.

このアンサーは役に立ちましたか?

スコア 2

3 件のコメント:

@danj I didn't even think about the clutch cover and headed straight for the logo bezel cover..you're probably right, quite useless answer.

This is the one I thought was needed: https://www.ebay.it/itm/LCD-Display-Blen...

さんによる

It could need both!

さんによる

コメントを追加

回答を追加する

Robin Ray さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,704