評価: 29
2
3
2007 iMac will boot into safe mode, but goes to the progress bar and stalls in regular mode. I have replaced the hard drive and attempted to load an OS. I’ve tried Tiger, Leopard and El Capitan. No luck so far with anything. I still get the circle/slash. At one point, the machine attempted to boot then it shut down. Suggestions? I have a time machine backup, but can’t access it.
評価: 685.3千
3.4千
1.1千
2.6千
Please go here and enter your serial number (located on the bottom of your stand) and tell us your exact machine
https://everymac.com/ultimate-mac-lookup...
Do you have an original system installation disk?
Your machine may not take anything higher than 10.7.5 Lion.
You will need to format your new drive before attempting to install a system.
このアンサーは役に立ちましたか？
serial # is qp81504qx88
don’t have the original media
machine came to me with EC installed
what’s the best way to format the new drive?
Thanks
SH
Apple iMac "Core 2 Duo" 2.4 20-Inch (Al) Specs
Identifiers: Mid-2007 - MA877LL - iMac7,1 - A1224 - 2133
Pre-Installed MacOS: X 10.4.10 (8R4031) Maximum MacOS: X 10.11.x*
Download El Capitan here:
http://downloads.tomsguide.com/OS-X-El-C...
You will need an external USB to SATA source such as a flash drive with a system installed on it and the system installation. Use Disk Utilities to format the internal drive, then install the system.
過去 24時間: 0
過去 7 日: 0
過去 30 日: 2
今までの合計 134
1件のコメント
Hi mayer .. installed new drive, ran disk utility on another Mac and formatted the drive. Loaded El Capitan. iMac starts, progress bar goes about 3/4 of the way and stalls, then the machine goes to a grey screen. I even tried a time machine backup, which completed, but it does the same thing. Could it be a hardware issue?
Thanks, SH
shull さんによる