What to do with the digitizer flap when re-assembling

Question

iPad 5 LTE

2017年3月に発売されたiPadの第5世代のLTE対応モデル。9.7インチRetinaディスプレイと64ビットA9プロセッサーを搭載しており、32 GBおよび128 GBのストレージオプションがあります。

46回答すべてを表示

dlcatftwin @dlcatftwin

評価: 31

2

1

投稿日: 2019年6月15日

オプション

What to do with the digitizer flap when re-assembling

Greetings,

My question is regarding step 31 of the iFixit front panel replacement:

iPad 5 LTE フロントパネルアセンブリ

And it appears that another person had a similar question at this point, with their question left unanswered.

Here’s my question:

The “hinge” part of the digitizer cables (the flap portion) looks like it is supposed to tuck into the crevice between the LCD panel and the side of the aluminum body - my replacement (from iFixit) has sticky contact on the upper side of this flap, making me think that its supposed to adhere to the side of the LCD panel, but the instructions do not make this clear - is my assumption correct?

I’ve attached a picture of the area in question.

Thank you for any response to my query.

Regards,

DLC

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

Minho @refectio

評価: 221.4千

15

289

807

投稿日: 2019年6月15日

オプション

This is how the flex should be positioned prior to final assembly.

Some suppliers fold it over and adhere it to the digitizer beforehand while others let you do it yourself. It’s hard to say from your picture as it is not clear enough. If you have to adhere it yourself, keep in mind that the flex (the portion with the connectors) has to do an inside-out for it to be positioned properly.

Also, check out this answer (After doing my repairs (battery and screen) I have problems) I provided earlier for some general “best practices” on iPad re-assembly.

このアンサーは役に立ちましたか？

はいいいえ

スコア 4

1件のコメント:

Hello Minho,

Thanks (again) for such invaluable information - I wound up adhering the flap to the underside of the digitizer-i noticed this was done on the original OEM front panel and I simply emulated the procedure - it only stayed completely in place once the iPad was completely assembled.

Thanks again,

DLC

dlcatftwin さんによる2019年6月15日

コメントを追加

Hello Minho,

Thanks (again) for such invaluable information - I wound up adhering the flap to the underside of the digitizer-i noticed this was done on the original OEM front panel and I simply emulated the procedure - it only stayed completely in place once the iPad was completely assembled.

Thanks again,

DLC — dlcatftwin

iPad 5 LTE

What to do with the digitizer flap when re-assembling

1 件の回答

回答を追加する