メインコンテンツにスキップ

2016年3月に発売された4インチのiPhone。ハードウェア仕様は6sに類似しています。シルバー、スペースグレイ、ゴールド、ローズゴールドのカラーが揃っています。16/64 GB容量、Model A1662とA1723

1049回答 すべてを表示

Phone cannot determine percentage/shutdowns(Changed the battery twice)

Block Image

I have replaced the battery in my iPhone SE with two new batteries, both unable to work out how much charge there is (sometimes stays at 1% and changes when I plug/unplug the charger) The first battery I used made the phone restart (even while charging) every 3 mins or so, the battery I’m currently using is staying around 58% and is telling me to service in battery health. Both batteries were from eBay and I’ve tried basic troubleshooting like a software reset, updates and checking that the connectors are pressed in properly.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Do a thorough visual inspection, preferably with magnification, of the area surrounding the battery connector. There are several tiny SMD components just above the connector. Of particular importance is FL2400, hghlighted in red. If it is missing (which can happen when you pry the connector off), then the battery state does not get communicated to the CPU and this can also cause charging issues and fluctuating readings.

Block Image

This can be repaired via a micro-soldering repair.

このアンサーは役に立ちましたか?

スコア 4

1件のコメント:

Thanks, I will open up the phone and take a look.

さんによる

コメントを追加

回答を追加する

Aaweso_me さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 65