メインコンテンツにスキップ

モデル番号A1286、発売日 2011年2月/2.0, 2.2もしくは2.3 GHzクアッドコアIntel Core i7プロセッサ

585回答 すべてを表示

Help identifying burnt-out component

Hi there.

I have a dead MacBook Pro. I’ve taken it apart to find the fault, and there is a component on the motherboard that’s blown.

Block Image

Block Image

Block Image

Whether that's cause or symptom I don’t know (there seems to be some heat damage to neighbouring components).

Can anyone help with identifying what the component is?

Thanks

Michael

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
1件のコメント

Hi, just to say that I replaced the capacitor and hey presto! One working MacBook Pro.

Didn’t need to replace anything else.

So thanks for the advice, and if anyone else sees this, I hope this is useful.

Michael

さんによる

コメントを追加

1 件の回答

ベストアンサー

From what your image shows you need the following parts:

C8930 - 68UF 20% 16V Poly-Tantalum Capacitor

L8920 - 0.56UH-31A Inductor

Q8951 - RJK0208DPA Silicon N Channel Power MOS FET with Schottky Barrier Diode Power Switching

Please post a picture of the other side as you may have other issues.

Do you have the tools & skills to do the needed micro soldering?

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

Hi, thanks for this. The reverse seems fine, see photo.

I can do the capacitor and the inductor, the FET might be beyond me. I’m tempted to do the ones I can and see if that solves it…

Michael

さんによる

コメントを追加

回答を追加する

Michael F さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 96