Using a 2010 MacBook Pro for parts?

Question

MacBook Pro 13インチ Unibody Mid 2012

2012年半ばモデル、A1278/2.5 GHz i5または2.9 GHz i7プロセッサー。

1623回答すべてを表示

Geoff Isaac @geoffisaac

評価: 11

投稿日: 2019年4月25日

オプション

Using a 2010 MacBook Pro for parts?

Hello. I have a mid-2012 MacBook Pro. This Mac has many problems. The keyboard and track pad are barely responding, the hdd flex cable tore, the screen is cracked and the FaceTime camera flex cable is broken? Can I purchase a broken 2010 MacBook Pro and pull the parts from it to fix my mid-2012?

1) Trackpad

2) Keyboard

3) HDD Flex cable and bracket

4) FaceTime Camera Flex cable

5) The glass over the LCD. LCD is fine!

let me know!!

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

arbaman @arbaman

評価: 102.6千

10

54

291

投稿日: 2019年4月25日

オプション

You would be able to use if for:

screen glass (if it doesn’t break upon removal attempt)
keyboard
trackpad
other parts you need are not cross compatible unfortunately. You could pull them from a early 2011 (i5 or i7 but not from any other older Mac)

このアンサーは役に立ちましたか？

はいいいえ

スコア 2

4 件のコメント:

So a 2010 MacBook Pros HDD flex cable is a no go?

Geoff Isaac さんによる2019年4月25日

The cable itself would work but it's not recommendable, especially if you're planning to use an SSD one day or another. It's usually recommended the opposite instead to avoid bottlenecks.

arbaman さんによる2019年4月25日

So do you think it would be more difficult to replace the keyboard and trackpad individually or doing the entire top case?

Geoff Isaac さんによる2019年4月25日

One way or the other you'll have to remove the logic board to get them replaced. Once the board is off, replacing the trackpad is quite easy and fast. The keyboard is not really difficult, you'll have to remove superdrive (3 screws only) and to use some modest heat to soften the adhesive keeping the backlight sheets in place. When that's done the keyboard gets accessible, you have lots (80/90) of tiny screws that take some time but it's a pretty straightforward job, it just needs patience and a decent PH000 screwdriver that's needed for the trackpad too.

I believe you may find a videoguide on youtube for help if needed.

arbaman さんによる2019年4月25日

コメントを追加

The cable itself would work but it's not recommendable, especially if you're planning to use an SSD one day or another. It's usually recommended the opposite instead to avoid bottlenecks. — arbaman
So do you think it would be more difficult to replace the keyboard and trackpad individually or doing the entire top case? — Geoff Isaac
One way or the other you'll have to remove the logic board to get them replaced. Once the board is off, replacing the trackpad is quite easy and fast. The keyboard is not really difficult, you'll have to remove superdrive (3 screws only) and to use some modest heat to soften the adhesive keeping the backlight sheets in place. When that's done the keyboard gets accessible, you have lots (80/90) of tiny screws that take some time but it's a pretty straightforward job, it just needs patience and a decent PH000 screwdriver that's needed for the trackpad too.

I believe you may find a videoguide on youtube for help if needed. — arbaman

MacBook Pro 13インチ Unibody Mid 2012

Using a 2010 MacBook Pro for parts?

1 件の回答

回答を追加する