メインコンテンツにスキップ

2012年、Sony Entertainment は2006年 Playstation 3コンソールの新モデルバージョンを発売することを発表しました。この新コンソールは、Playstation 3 Super Slimと呼ばれ、モデル番号はCECH-4000です。PlayStation 3 Super Slim (CECH400x) はSony Computer Entertainmentによって製造された第三番目のPS3ビデオゲームコンソールです。2012年10月25日に発売されました。

211回答 すべてを表示

My ps3 spins up a game disc but won’t read the disc.

I found a ps3 super slim at my work. ( I clean out mobile homes) all discs will spin up but only dvd’s, and cd’s will read. Blue ray movies and ps3 game discs won’t work. The internet and other forums said that a weak laser is to blame so I replaced that, made sure all the ribbon cables are fully seated, held the disc door closed so everything would spin up…and now it won’t read any kind of media. With games it will show the spin up symbol but not load it up. With cd’s it says loading error “check network settings” if you have any idea of what I need to fix/replace or try then hit me up. This is my last try at fixing this thing :)

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

最も参考になった回答

Hi @tactipants

Most likely the blu ray lens section is faulty.

Sadly seems it is quite common.

I had helped some of my family members in replacing the lens traverse mechanism part.

After some time of usage, maybe a couple of years, it failed again and have to repeat the procedure.

Not sure if it is due to bad part / quality or somewhat has caused this.

Based on the info provided by folks around….

you need to find the matching lens mechanism part to do replacement.

このアンサーは役に立ちましたか?

スコア 2

7 件のコメント:

I replaced the whole lens bay today with a new one. The metal tab with the two lenses and I made sure the part numbers matched. I said that in my post, thanks anyways!

さんによる

Hi Lance, my mind is still booting up, lol

Is the lens replacement part correct / same with the existing one?

さんによる

Yeah, it’s a KEM-850 PHA. The replacement drive is also a KEM-850 PHA and after visually comparing them they look exactly the same. I’m really stumped. After tinkering with it tonight, it spins up the disc a few times and sounds like a car shifting but never getting to a higher gear. After 5 attempts it quits and stops the disc. I’m really new at the electronics repair stuff so any help is better than what I have so far from YouTube and Google :)

さんによる

@tactipants

Had you tried replacing back the previous one and try?

さんによる

I haven’t yet, I’ll try that and check back in a few minutes, thanks for your quick responses!

さんによる

2件以上のコメントを表示

コメントを追加

回答を追加する

Lance Gaerte さん、ありがとうございました!
統計データ:

過去 24時間: 3

過去 7 日: 10

過去 30 日: 37

今までの合計 3,220