メインコンテンツにスキップ

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

1041回答 すべてを表示

Top of touch screen won't respond to touch after screen replacement

I recently replaced the whole display of my iPhone 6S plus with the ifixit kit. I tested the touch functionality before sealing it up and everything seemed to be working fine. But as it turns out, the top 10% of my screen won’t respond to touch. So I can’t swipe down to get to notifications or use the Back Menu buttons in my applications.

I’m pretty sure I’ve got all of the connectors for the digitizer seated properly but I could be wrong. The rest of the screen works well and it’s just that top 10% that doesn’t respond.

Before opening it up again to check the connections, I wanted to see if there were any specific reasons why only the top of the screen wouldn’t be functioning. Hopefully that clue will give us a better idea where to start.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Usually it's either a faulty screen or connectors on the board and screen need to be cleaned. You can use isopropyl alcohol and a brush to clean both connectors. Sometimes dust in the connector stops the screen from having a good connection.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Allan Lam さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 51