メインコンテンツにスキップ

モデル番号A1419 / Late 2012 / 2.9 & 3.2 GHz Core i5 or 3.4 GHz Core i7 プロセッサ

330回答 すべてを表示

Black screen after startup with the chime sound

Urgent help needed!!

I bought new logic board, for my 27” iMac late 2012,

I followed the IFIXIT video instruction exactly as showed, and I replaced my board with the new one and afterwards I turned on my iMac and heard the chime, but it has a black screen!

I don't really know what's wrong, can anyone give me a clear reason for this problem.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
4 件のコメント

What video did you follow? I don't know of an iFixit video replacing the logic board for this system.

Also why did you think you needed to replace the logic board? The more detail here might give us an idea what the issue is.

さんによる

Oh might not be ifixit video, the reason I change the logic board was the display was showing line and I can hardly see a thing and the mouse won't move the way it use to, I have a video. https://www.dropbox.com/s/ipctuawd51u1y7...

さんによる

Where are you located?

I think your real issue is a bad power supply given the vid. Do you have your system plugged into a surge suppressor or better yet a UPS.

さんによる

I am here in Nigeria, even as that the screen should have boot up just the way it was before.

さんによる

コメントを追加

2件の回答

最も参考になった回答

Here’s a god video on replacing the display How to Re-Apply Your 27” iMac Display. Often times the display connector gets put in backwards!

For reference here’s the iFixit guide on how to replace the logic board iMac Intel 27インチ EMC 2546 ロジックボードの交換 You might want to review it to see if something stands out differently than what you did.

このアンサーは役に立ちましたか?

スコア 1

1件のコメント:

What does the internal diagnostic LED's telling you?

さんによる

コメントを追加

Hello I been servicing HDTV and monitors for over 25yrs, if you replaced the logic board and still get the same issue or no screen, then this may be a panel issue. The panel matrix is faulty and need to replace. Replaced the screen. Also have the power supply checked for Leaky capacitors or ones that are swollen on its tops.

このアンサーは役に立ちましたか?

スコア 0

1件のコメント:

Thanks for your response, I wasn't getting thesame issues I only can't see anything on my screen this time, my guess would be LCD , but before u conclude it LCD I will have to try and connect to external monitor.

さんによる

コメントを追加

回答を追加する

SKYMENZ films さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 146