メインコンテンツにスキップ

2016年9月16日に発売。モデル番号は1778,1784。 GSM かCDMAの32、128、256GBがあり、色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラックがあり。

1361回答 すべてを表示

Touch ID Not wokring After New Screen

I replaced the screen on my iphone 7 plus and now the touch ID will not work. I have read that you need to have the origional home button which I have installed and still not working. I have also read that the board may reject the new digitizer. Is there anything I can do without taking it to the manufacturer to get this touch ID to work?

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

最も参考になった回答

Does your old screen still function? If so, put the home button back on the broken screen to see if it still works. If it doesnt not, then it was damaged somehow during the repair. If it does work, then most likely you have a bad replacement part. I have had this happen before where the screen works perfect, but the touch id does not.

このアンサーは役に立ちましたか?

スコア 1

4 件のコメント:

It does still function but severly cracked. I will try and re attach it and see if the touch id works. I did buy a replacement home button but the origional and replcacement both do not work.

さんによる

Replacement home buttons will not work. Only the original one with the original logic board will work.

さんによる

just put the old screen back on with the origional home button. Now still getting a no touch ID available. Any Idea which connector is broken? its is possible to get a new connector or will I have to purchase a whole new screen?

さんによる

If you put the original screen back on with the original home button and you are still getting no touch id, then more than likely the home button flex cable was damaged. Can you upload any pics of the home button?

さんによる

コメントを追加

回答を追加する

Tyler Golden さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 66