メインコンテンツにスキップ

2012年半ばモデル、A1278/2.5 GHz i5または2.9 GHz i7プロセッサー。

1623回答 すべてを表示

2012 13" MacBook Pro won't turn on unless battery is unplugged first!

My 13" 2012 Macbook Pro has not been starting up (and randomly shutting down when unplugged). I'm looking to get it fixed. It does not turn on unless I unplug the battery from the mother board then plug it back in (Ive tried resetting the PRAM and SMC…no response).

The battery is only showing around 150 cycles and it was replaced back in 2015. The battery is also showing a charge when plugged in.

I noticed that the mag safe light flickers green when I am trying to boot up...but no response. I am also hearing a clicking, from beneath the power button, when pressing the power button but no response on the screen or with the boot up chimes. Any help is appreciated. Thank You!

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
1件のコメント

My primitive CompTIA A+ skills tell me to try a replacement battery and/or another charger to see if this solves the issue before diving deeper into any other troubleshooting.

I'm going to tag some mac gurus that are more knowledgeable than me to help out on this issue to provide more in-depth insight @mayer @danj

さんによる

コメントを追加

1 件の回答

最も参考になった回答

Review this Apple T/N Apple Portables: Troubleshooting MagSafe adapters Make sure you are using a good MagSafe charger OEM MagSafe Chargers vs Cheap Imposters: Teardown for Truth and the cord and connectors are in good shape any damage will require replacing the charger and you may need to replace the MacBook Pro Unibody 13" and 15" MagSafe DC-In Board following this guide MacBook Pro 13インチ Unibody Mid 2012のMagSafe DC-Inボードの交換.

MacBook Pro Unibody 13" and 15" MagSafe DC-In Boardの画像

製品

MacBook Pro Unibody 13" and 15" MagSafe DC-In Board

$9.99

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

djdino215 さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 86