メインコンテンツにスキップ

The Acer Extensa 4630z is a laptop computer introduced by Acer in 2008. The Acer Extensa series is a line of Acer laptops designed for business and office users.

4回答 すべてを表示

Why is the display not working after I reinstalled the RAM?

I removed and reinstalled the RAM and HDD and powered my laptop and it ceases to display anything. As a matter of fact it was working properly before but was crashing during Windows Xp loading with BSOD, Now the laptop powers on but no display whatsoever.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
2 件のコメント

@huracanevo are there multiple memory module installed?

test with one stick at a time

さんによる

I only have single RAM but two DIMM

slots

さんによる

コメントを追加

2件の回答

ベストアンサー

It is seem to be only some boot hardware failure. Do you get any system beep sound when you power on laptop. Do one thing. Only install RAM in same slot where it was working before. Do not install HDD. Now power on laptop. Also inform any LED on display turn on or now.

I think ram is not properly installed or hdd is not properly fixed. Inform us what is system sound or beep sound when turn on.

このアンサーは役に立ちましたか?

スコア 0

3 件のコメント:

There are no beeping hardware internally installed .... there are LEDs indicating HDD ........ I will give it a try

さんによる

Display should work no matter HDD is installed or not ,right Its just the RAM that display is affected

さんによる

Did it and no sign of display working..........But the first time I press power button it powers up ...shuts down for a while and then powers up again......What is the cause?

さんによる

コメントを追加
最も参考になった回答

The ram may not be seated in fully or dust is inside the ram slot. Make sure they are seated in well.

このアンサーは役に立ちましたか?

スコア 1

3 件のコメント:

No I did it multiple times but the results are same

さんによる

Hi @huracanevo ,

You didn't leave the battery in when you removed / replaced the RAM and HDD did you?

Try a power reset,

remove battery (and charger if inserted) press and hold Power button for 20-30 seconds then release.

Insert charger and switch on charger (leave battery out)

Assuming RAM at least is installed, turn on laptop and check if display works.

さんによる

I actually went through Youtube videos that said static could be the cause of display not working......I did that multiple times as well ...no luck

さんによる

コメントを追加

回答を追加する

Namaste Holiday さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 308