メインコンテンツにスキップ

食器洗浄機の修理と解体ガイド

302の回答 すべてを表示

Removing Bosch SHP65T55UC/02 control module

I’m trying to remove the control module for a Bosch SHP65T55UC/02 dishwasher and I cannot figure out how to remove it. I have the door separated and after slightly bending the 5 top clips back it still won’t budge. Any help would be appreciated!

Block Image

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

選択されたソリューション

the side with the five clips is not the side the control panel is released from…the control panel together with the facia plate is released from the door by undoing the 3 torx 20 screws in the handle (top of recess). once the control panel and facia plate are removed from the door assembly the release tabs highlighted in the attached photo can be accessed...these clips are facing the exterior front panel…lift the clips while gently pushing the panel down (towards the bottom of the machine) and the control panel will fall away from the facia plate.

Block Image

この回答は役に立ちましたか?

スコア 3
コメントを追加

Hi @jasons1969 ,

Don’t know if this is a help or not but here’s a link to the parts for your dishwasher.

Scroll down the parts diagrams on the left of the page to find the “base assembly” diagram, click to enter and then hover your mouse over the parts diagram to find part #0510 which is the control board.

Hopefully you may be able to work out how it is held in from the diagram.

この回答は役に立ちましたか?

スコア 2
コメントを追加

回答を追加する

Jason Van Halen さん、ありがとうございました!
統計データを表示:

過去 24時間: 3

過去 7 日: 3

過去 30 日: 5

今までの合計 99