メインコンテンツにスキップ

2015年3月にアップデートされたAppleのMacBook Pro 13" Retina Display Early 2015 はモデル番号はA1502、第5世代のIntel Core i5と i7プロセッサーが特長でForce Touchトラックパッドを備えています。

1183回答 すべてを表示

Proper way to reattach WiFi cables?

I’ve recently encountered a problem when trying to reassemble my MacBook Pros Airport card, I got it to fit in the slot on the logic board. But my problem now is reattaching the wires. For me it seems they don’t want to stay down very much and a lil tap knocks them off again. Is there a good and easy way to go about attaching them again?

I’ve included a couple pictures of the board and wires.

Block Image

Update (02/12/2019)

Block Image

Block Image

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 1
2 件のコメント

Take a picture of the cable ends from the top and bottom

さんによる

Sure thing, I’ll go do that

さんによる

コメントを追加

2件の回答

ベストアンサー

The antenna connectors are annoyingly tiny. Make sure you are routing and connecting them in a manner that doesn’t stretch or strain them, or else they might be more prone to snapping. Use a nylon prying tool to properly place and then fasten them to the Airport card.

They should be connected in the following order from right to left: antenna with short piping-antenna with long piping-antenna with no piping.

Also inspect the antenna connectors to ensure they aren’t flattened out and/or damaged by pressure applied to them in the reattachment process.

このアンサーは役に立ちましたか?

スコア 2

2 件のコメント:

A photo would help - when working from right to left which side is the top?

さんによる

Presumably one holds the card with the writing the correct way up and the three connectors on the bottom and then work from right to left.

さんによる

コメントを追加

Looking at the connector image it looks like they are a bit bent (out of round) carefully squeeze them so they have a bit more tension.

このアンサーは役に立ちましたか?

スコア 1

6 件のコメント:

The antenna connectors seem fine to me.

さんによる

@danielbraun - look as the shield gaps some are a little large

さんによる

@danj I don't know man, still can't see it! Am I going crazy?

さんによる

Think it like a drill collet that clamps around a drill ...

さんによる

I get the mechanism, I just don't see any damage in the photo he posted

さんによる

1以上のコメントを表示

コメントを追加

回答を追加する

Wolfe Hunter さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 11

今までの合計 1,204