As the 1.67 GHz model display wasn´t working properly, I replaced it doing exactly as the told by the fixit instructions.
Now it wont start up. By pushing the start button only the fans start working like mad...
someone can help?
thanks a lot
margarida
この質問は役に立ちましたか？
評価: 32.4千
207
156
62
Hi! Does it beep or chime? The first thing I would check is that the memory and Airport are fully seated, and I'd try powering on with only one memory slot at a time populated, in order to test the slots. Also try resetting the PMU.
このアンサーは役に立ちましたか？
Thanks for the answer; I´ll try out what you suggested with th memory and airport...I´ll already tried resetting the PMU - nothing happened. It doesn't beep or chime..
Why check the airport?
You're right, sorry, on this model with the embedded Airport, it's not necessary to check the Airport. I forgot to verify the model. I mentioned it because on PowerBooks which have the standard removable Airport card, occasionally they will not be fully seated, causing the machine to boot into open firmware mode, or not boot at all. In the last year I've been sold several 12" PowerBooks "broken" that just needed the Airport pushed in tighter.
Just push the Airport card in tighter wont solve the problem of these iBooks G4 12" 1.33Ghz. The problem will reappear sooner or later on these units. Be aware...
Hello lemerise, it's not an iBook g4 ; it is a 17" PowerBook G4...
rdlink , in what concerns the main problem, it remains as it was... I probably have to do everything from scratch, but it's time consuming (and a little scary) and I haven't had the guts to do so yet!... thanks for the help and - if you think it's all right -as soon as I've tried it again I post what happened...and if someone has another idea, please share...
thanks again, margarida
このアンサーは役に立ちましたか？
過去 24時間: 0
過去 7 日: 0
過去 30 日: 0
今までの合計 555
1件のコメント
Is it the PB 1.67 high resolution (last model) ?
lemerise さんによる