メインコンテンツにスキップ

より早い処理スピードを可能にしたiPhone 3Gのアップグレード版です。このデバイスの修理は3Gと似ており、標準のドライバーと開口ツールが必要です。モデル番号 A1303 / 16 もしくは 32 GBの容量 / ブラックもしくはプラスチックの背面ケース

1500回答 すべてを表示

After water damage - LCD has no light

Hi,

The phone dropped into a toilet.

And immidiate got out, and been dried with a fan.

It was 1 week ago, and phone works fine but the screen is very dark, and it has no light!

I barely see the icons..

But the incoming/outgoing phonecalls are working, also the touch.

What is responsible for the Light in the screen? That could be damaged?

**Note:

  • Anyway I am going to open the phone now and make a water damage repair (Clean with alcohol etc)
この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1
コメントを追加

1 件の回答

最も参考になった回答

jea, clean it and the display connector ! should help very well. if not, you should buy a new display

cost 20 bugs.

このアンサーは役に立ちましたか?

スコア 1

9 件のコメント:

in a 3gs it is more likely the backlight coil if a good clean doesn't sort the problem out. that part is a 6r8 which will require soldering...

さんによる

Hi pollytintop,

I didn't understand what is: "backlight coil", and "6r8 which will require soldering"

I took out the LCD, cleaned the connector.. and still no light :/

I checked with another LCD, and the other LCD works fine.

Thank you for helping.

Shai

さんによる

Ok, Did you mean that the problem is in the backlight coil, and in order to fix it, I will have to solder it?

Can you please add a picture that shows where is that backlight coil?

Thanks again man!!!

さんによる

you've answered your own question. another LCD works.. so the problem isn't the backlight coil (which is on the motherboard) clean the LCD flex end and see if that helps. otherwise like ion said you need a new LCD.

さんによる

Yes - Another LCD works.

I did not know the coil is on the MB :-)

So..?

What about some coils/flex cables on the defective LCD? No option o fix it somewho?

Thanks

さんによる

4件以上のコメントを表示

コメントを追加

回答を追加する

Shai さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 3,546