iMac gets Power but won't turn on
Original issue: No picture over built in and external monitor.
Current issue: Won’t turn on - But holding power on button while plugging in let’s the fans run at 100%.
What led to from issue 1 to 2: According to the internet baking the gpu could fix the soldier points (eg broken ones). In my case a resistor came off and i had to solder it back on.
After putting everything together, the iMac won’t turn on. LED1 on the logic board is illuminated. Disassembled, reconnected everything and reassembled it, but the iMac still won’t turn on - other LEDs are still off and fans are not spinning.
この質問は役に立ちましたか?