Touch ID failed after screen replacement now two screens failed too

Question

iPhone 7

2016年9月16日に発売。モデル番号は1660, 1778で GSM かCDMA があり。/ 32、128、 256 GB / 色はローズゴールド、ゴールド、シルバー、ブラック、ジェットブラック

2264回答すべてを表示

Albert @thephonebloke

評価: 1

投稿日: 2018年11月27日

オプション

Touch ID failed after screen replacement now two screens failed too

I recently replaced a screen on an iPhone 7 and the touch ID failed. I have replaced many screens including quite a few 7s and I’m very careful not to damage the original home button - there’s no visible damage that I can see with this one. After a while the screen itself then failed. I replaced it with a new screen (client was using the back-up home button that comes up on screen in the meantime until I worked out what to do). The home button still wasn’t working but client said they didn’t use touch ID anyway so if I could just install another home button and screen then that would be fine. I ordered another screen and that one also failed after a day. Thinking I had got a bad batch from somewhere I ordered a screen from a different supplier. This went in fine yesterday but today the customer is having trouble with the screen again. I’m baffled, firstly as to why the home button failed in the first place and secondly why the screens start off fine and then seem to fail. Any ideas as to what is going on please? I’ve backed up the iPhone and installed from scratch and that didn’t work.

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

ベストアンサー

Minho @refectio

評価: 221.4千

15

289

807

投稿日: 2018年11月28日

オプション

There a couple of possibilities here…

1) What kind of screen quality are you buying? Cheap eBay/Amazon stuff or from a reputable supplier? Inexpensive screens are inexpensive for a reason. Not that they don’t work but you’re more likely to run into screen problems.

2) The HB issue could be related to a bad screen (see above)

Do you still have the original screen? If so, install that one and test it for a day or two. If that one works, then your issue is with the replacement screens. If it also fails, then you may have damaged the logic board (check the connectors and tiny components surrounding the connectors).

Unfortunately, you can’t just install “another” Home Button, only the original will work for “click” functions.

このアンサーは役に立ちましたか？

はいいいえ

スコア 3

4 件のコメント:

There is a home button called JC, which uses a bluetooth connection as a workaround. It is not ideal, but some will accept this as an option. The dude from STS Telecom, does a review on it.

https://youtu.be/zURYa93apDg

@thephonebloke Albert, I assume you are doing these inspection under a microscope...?

Roland Chandler さんによる2019年4月6日

Thank you @refectio . Sorry it has taken me so long to reply, I completely forgot I posted this query. I had been using mid-range screens but have now found a good supply of high quality screens and always use them, which has made a real difference. In the case mentioned above I managed to update the software and install a high quality screen and this meant the customer could use the phone even though I wasn’t able to rescue the home button. He was happy to use the onscreen button until he upgraded his phone as he hadn’t been able to use it at all beforehand, so I was lucky in this instance.

Thanks very much @drfixit_tech for the tip about the JC button, I really appreciate it.

Albert さんによる2019年8月6日

Thanks Albert, it's always nice to get feedback!

Minho さんによる2019年8月6日

Only a pleasure to share the knowledge Albert @thephonebloke

Roland Chandler さんによる2019年8月6日

コメントを追加

There is a home button called JC, which uses a bluetooth connection as a workaround. It is not ideal, but some will accept this as an option. The dude from STS Telecom, does a review on it.

https://youtu.be/zURYa93apDg

@thephonebloke Albert, I assume you are doing these inspection under a microscope...? — Roland Chandler
Thank you @refectio . Sorry it has taken me so long to reply, I completely forgot I posted this query. I had been using mid-range screens but have now found a good supply of high quality screens and always use them, which has made a real difference. In the case mentioned above I managed to update the software and install a high quality screen and this meant the customer could use the phone even though I wasn’t able to rescue the home button. He was happy to use the onscreen button until he upgraded his phone as he hadn’t been able to use it at all beforehand, so I was lucky in this instance.

Thanks very much @drfixit_tech for the tip about the JC button, I really appreciate it. — Albert
Only a pleasure to share the knowledge Albert @thephonebloke — Roland Chandler

iPhone 7

Touch ID failed after screen replacement now two screens failed too

1 件の回答

回答を追加する