メインコンテンツにスキップ

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

1041回答 すべてを表示

Replaced rear camera, and now flash and the rear camera don't work.

Not sure what to do about this. Had the blurry focus issue with rear camera, ordered new one, replaced it. And after putting everything back together, not only does the rear camera not show up, but torch doesn’t work.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 1

1件のコメント:

Same issue kind of.... My 6s+ was plagued with the shaky tracking issue everyone else has.

I bought a replacement and installed it. Now flash/led does not work and the camera is not recognized by any app. (Black screen). I reopened the phone and reinserted the OEM one… same issue. All connections are tight and everything is replaced as it should be.

I’ve reseated the ribbons 10 times (which each camera, old and new) and restored my phone to factory. No change.

Did I damage the board? I’ve seen a ton of these questions asked but the answers are always “reboot the phone” “reseat the cables”. That’s not the answer here.

What’s my next move?

さんによる

コメントを追加

1 件の回答

be sure the connector is completely connected on the board, also check for damage on the flex cable for the camera & flash.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Jordan Wright さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 41