メインコンテンツにスキップ

Mid 2009 モデル番号A1278 / 2.26、2.53 GHz Core 2 DuoプロセッサーEMC 2326

745回答 すべてを表示

3 Beeps after installing RAM

I purchased 2x 4GB PC3-L 12800s DDR3 1600MHz and installed both sticks, got 3 beeps when trying to boot. I removed 1 new stick and installed old 1GB stick and Mac booted up just fine.

I then found out that these were the wrong RAM for my mac and so I removed the new RAM and bought and installed 2x 4GB PC3-8500 DDR3 1066MHz and got the 3 beeps again. I removed one and installed the old 1GB stick, and got the 3 beeps again. I tried every combination using the new and old or the new only and still getting the 3 beeps.

Help please!!

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
2 件のコメント

Is the beep pattern identified on this list?

https://support.apple.com/en-us/HT202768

さんによる

Is the 'old' setup not working anymore ?

さんによる

コメントを追加

2件の回答

ベストアンサー

Exactly which machine do you have? Please go here and input your serial number from the back of your machine in very fine print:

https://everymac.com/ultimate-mac-lookup...

UPDATE

Thanks for giving us your exact machine.

Install the original RAM. Zap the PRAM

Here's how to reset your PRAM:

  • Shut down your machine. Yes, all the way down, not sleep or logging out.
  • Press the power button and then press command-option-p-r. ...
  • Hold those keys down until your Mac reboots again and you here the startup chime.
  • Let go of the keys and let your Mac reboot normally.
  • If this works, install one of the new chips and boot, then do the next one.

このアンサーは役に立ちましたか?

スコア 3

6 件のコメント:

MacBook Pro "Core 2 Duo" 2.26 13" (SD/FW) 2.26 GHz Core 2 Duo (P7550*)

Intro. June 8, 2009 Disc. April 13, 2010

Order MB990LL/A Model A1278 (EMC 2326*)

Family Mid-2009 13" ID MacBookPro5,5

RAM 2 GB VRAM 256 MB

Storage 160 GB HDD Optical 8X DL "SuperDrive"

Complete MacBook Pro "Core 2 Duo" 2.26 13" (SD/FW) Specs

さんによる

Firstly, thank you for all your help.

I reset the PRAM with the original RAM, then replaced the 1 and tried to reset the PRAM however I got the three beeps...

:(

さんによる

Try the same thing with just one stick in each slot.

Reset the SMC:

Connect the power adapter to the Mac. On the MacBook / Pro's keyboard, hold down the Shift+Control+Option keys and the Power button at the same time. Release all keys and the power button at the same time – the little light on the MagSafe adapter may change colors briefly to indicate the SMC has reset.

Connect the power adapter to the Mac. On the MacBook / Pro's keyboard, hold down the Shift+Control+Option keys and the Power button at the same time. Release all keys and the power button at the same time – the little light on the MagSafe adapter may change colors briefly to indicate the SMC has reset.

さんによる

So, resetting the SMC didnt work either :(

さんによる

My smc wouldn't reset either

さんによる

1以上のコメントを表示

コメントを追加

The “data corruption” 3 beep pattern during the power-on self-test means that you (most likely) still have the wrong (or static-electricity damaged!) RAM.

Go to crucial.com and find out what the right RAM is.

このアンサーは役に立ちましたか?

スコア 2

1件のコメント:

I have the exact RAM that is specified on the site you suggested...

さんによる

コメントを追加

回答を追加する

kianicolaou さん、ありがとうございました!
統計データ:

過去 24時間: 3

過去 7 日: 5

過去 30 日: 12

今までの合計 3,942