MacBook Pro won't turn on after logic board replace. Dim green light.

Question

MacBook Pro 13インチ Unibody Late 2011

2011年後期モデル番号A1278 / 2.4 GHz i5 or 2.8 GHz i7 プロセッサー

591回答すべてを表示

Jimmy Robertson @imjimjim21

評価: 119

6

4

投稿日: 2018年10月26日

オプション

MacBook Pro won't turn on after logic board replace. Dim green light.

I just replaced the logic board in my late 2011 a1278 Macbook Pro Unibody. It was diagnosed dead by apple so I thought I could replace it myself. So I put it in and it would not turn on. Just shows a dim green light on the charger. I bought the logic board for 250$ off Ebay from a good seller. The board doesn’t get warm at all even after charging for 4 hours so I don’t think it is getting power. Please help me!

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

1 件の回答

Dan @danj 評価: 478.9千 Self employed contract worker 35 329 970 · Answer 1 · 2018-10-27T08:13:34-07:00

最も参考になった回答

Dan @danj

評価: 478.9千

Self employed contract worker

35

329

970

投稿日: 2018年10月27日

オプション

A dim MagSafe LED often points to a bad charging logic on the main logic board. So I’m suspecting the replacement board you got is likewise damaged as well.

You still should check the DC-In board for damage. Here’s the IFIXIT guide to get to it: MacBook Pro 13" Unibody Late 2011 MagSafe DC-Inボードの交換 and heres the replacement part if you need it MacBook Pro Unibody 13" and 15" MagSafe DC-In Board. Make sure the small SMT components are not missing or damaged on the logic board.