修理を始めるには コミュニティ ストア

大きめのアップルMacBook Airラップトップはデュアルマイクと802.11ac Wi-Fi接続を特徴としています。

465回答 すべてを表示

オプション

Liquid spill on keyboard, fan runs, startup chime, but no screen

Cocktail spilled onto the keyboard and almost immediately the computer screen went black. Quickly unplugged and turned over to dump as much of the water out as possible, then left keyboard side down on a towel with the back and battery were removed. Left it to dry over night, and continued with the cleanup this morning… (I have some experience with taking MacBooks apart, so the tools were at the ready!)

However, when powered up, the fan begins to run, the cpu gets hot, and the startup chime rings (sooo the speakers work). BUT the screen is black. Any suggestions on what I can try next?

回答がありました！ 回答を表示 同じ問題があります

この質問は役に立ちましたか？

はい いいえ
スコア 0
コメントを追加

2件の回答

フィルタ：
参考になった順 新しい順 古い順
ベストアンサー

オプション

Try to plug a mini-dvi adapter to an external screen or a tv to get at least some basic insight if the image is still there when you boot. If image is there is a starting point and rules out major damage. However it is likely something got shorted along image/backlight power or data lines..give a close look at the connector and surrounding components and see if anything looks burnt or blackened..you’ll need a good light source and possibly magnification. In any case it seems to me a logic board component level repair will be needed to get your Mac back into shape.

このアンサーは役に立ちましたか？

はい いいえ
スコア 4
コメントを追加

オプション

First of all if you haven't already open the machine and inspect the logic board and see if there is any corrosion and/or blown parts.

Get a cloth and rubbing alcohol and clean up all water damage/corrosion on the logic board and if any components are blown you or somebody else will either need to replace them or get a new logic board if you are unable to.

Now boot up the machine and see if the display is working.

You should also shine a torch on the display and see if you can see anything. If you can the issue is to do with the LCD backlight.

このアンサーは役に立ちましたか？

はい いいえ
スコア 3

2 件のコメント:

Hi Steven! I did open it up and take it apart. Found some dampness and sticky residue, so I very carefully alcohol swabbed everything I could and let it air dry. I didn't see any corrosion or browning, but this was just with my naked eye; no microscope or spotlight. Plus, Im not a corrosion expert, so Im not really sure what I would be looking for in the first place! But nothing seemed noticeably unusual.

There is an image display but it is veerrrrryyy faint. The apple logo appears upon startup, along with the startup chime. It defaults to a "Reset Your Password"screen, but the keyboard is unresponsive so there is no way to type in the password!

Could this be a problem with the connectors (screen and keyboard) to the logic board? Or is the keyboard completely shot? (the power button works, and thats part of the keyboard!)

Also, the user profile selection comes up, so I feel that the memory isn't completely fried, right? (just trying to make myself fell better!)

さんによる

Plug in an external keyboard and try to log in.

さんによる

コメントを追加

回答を追加する

Erin さん、ありがとうございました！
統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 26

今までの合計 962