メインコンテンツにスキップ

Kodak PixPro AZ251 is a 16 Megapixel digital camera from Kodak released in 2013. It has a optical zoom of 25x and Optical Image Stabilization (OIS).

5回答 すべてを表示

Why isn't the screen producing a picture?

The screen has info on it but no picture

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

選択されたソリューション

Hi,

The camera may have a faulty CCD sensor or perhaps there is a problem with the motherboard or both.

Has the camera been dropped at all or gotten wet?

Try taking a picture, (I realize that you cannot “see” what you are taking) and then download it to a computer to check if there is a valid picture or just a black image.

If there is a valid picture then as you say that the LCD screen still displays “info” there may be a motherboard fault which prevents the image collected by the CCD sensor from being shown on the display.

If there is only a black image being shown then it is either a faulty sensor or a motherboard problem.

As you haven’t mentioned any other problems, more likely it is a sensor problem as the camera apparently seems to mostly function OK, i.e turns on/off OK, menus displayed OK etc.

Here’s a link to the ifixit Kodak PixPro AZ251 Repair guide which may help if you decide to open the camera and inspect the CCD sensor etc.

Unfortunately I couldn’t find any replacement sensors online. You may have better luck.

このアンサーは役に立ちましたか?

スコア 2

コメント:

Appears to be toast :(

さんによる

コメントを追加

回答を追加する

Kevin Hopkins さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 64

今までの合計 1,098