メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

Appleの iPhone 5sは2013年9月10日に発表されました。このデバイスの修理は全モデルの修理と類似しています。そしてスクリュードライバー、こじ開けツールが必要です。GSM か CDMA、16か32、64GBがあり、色はシルバー、ゴールド、スプレーグレイが選べます。

4053の回答 すべてを表示

There is a slight yellow tint on my iPhone 5S screen replacement

Hello, recently my friend gave me his old iPhone 5S to fix as it was old, but still worth salvaging. It needed a new screen and battery. Long story short, the battery went perfectly, but the screen is having issues. Everything works well on it. Touch ID, touch itself, front camera, ear speaker, etc. But, when the screen is installed/placed into the body of the phone, a slight yellow tint appears at the top. It is barely noticeable in the picture, but is clearer in person. I know it is not the screen because upon taking the screen out of the phones body, it disappears. I was told it was a pinch point within the screen caused by imperfect installment of the ear speaker, camera, etc., but even after uninstalling everything and reinstalling it multiple times, the issue still shows up. I keep watching YouTube videos and looking at tutorials on different websites on how to replace it and nothing I do seems to be wrong. Anyone know any errors I could be making? Or how to fix it?

Thank You!

-Caleb

Block Image

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

Thank you guys for the responses! There was a slight lift! The battery connector was not folded to fit in the gap between the logic board and battery, and was actually protruding upwards. I do not know how it created a yellow tint at the top of the phone, but it worked after folding it like the original battery…

Thank You!

さんによる

I have "EXACTLY" the same issue! but my battery connector is fine :/

さんによる

コメントを追加

今あるものを使い続けましょう

オールインワインキットで安く修理して、節約しましょう。

iPhone 修理キットを見る

今あるものを使い続けましょう

オールインワインキットで安く修理して、節約しましょう。

iPhone 修理キットを見る

2件の回答

選択されたソリューション

It’s a lift—-you have to find it. There is always a reason. If you do enough 5s screen changes you will find that you never get a lift, then when you do it jumps out at you immediately—-something is wrong! Usually it will be something pretty minor, a shard of glass, a bracket turned around upside down…the new battery having a label on it that makes it too thick where the old one didn’t….there is definitely a reason and you have to just figure it out.


I’d start by eliminating the variable of the new battery. Take it out and see if your lift goes away if you put the old battery back in with no adhesive.

この回答は役に立ちましたか?

スコア 1
コメントを追加
最も参考になった回答

Yellow mark indicates uneven pressure from behind screen pushing on that spot.

Try loosening the side screws a bit for the back metal plate on the screen and see if that helps.

Are the corners of the iPhone housing frame dented inwards in some way?

That can cause that issue too as it would mean the screen is not sitting flush with the frame.

この回答は役に立ちましたか?

スコア 5

コメント:

Thank you for the reply! The screw loosening did nothing and the screen is flush with the phone. The corners were bent in, but using a homemade fix, I was able to bend them out and the screen goes in fine. I do not know what the issue is at this point.

さんによる

コメントを追加

回答を追加する

SectorGaming さん、ありがとうございました!
統計データを表示:

過去 24時間: 12

過去 7 日: 59

過去 30 日: 251

今までの合計 6,935