メインコンテンツにスキップ

2014年10月22日発売。このモデルより、指紋認証「Touch ID」が搭載されています。

61回答 すべてを表示

Home Button Failure after Display Assembly Replacement

After a successful replacement of the glass on an iPad mini 3, the undamaged home button is not functioning when pressed. There are no errors reported on start-up. Given these circumstances, does this mean the connector on the logic board has been damaged? Again there are no signs of damage that I can detect.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

最も参考になった回答

Assuming you don’t have a teeny microtear in the flex then the MOST LIKELY problem is a parts problem on the screen. These are notoriously bad. Definitely make sure to test home button function before sealing it up.

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

回答を追加する

Michael Scott さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 38