A/V jack messed up- Screen flickers on and off

Question

Nintendo Wii

2006年11月に北米で発売されたWiiは、任天堂初のインターネット接続に直接対応した家庭用ゲーム機で、オンラインゲームと、Wiiショップチャンネルを通じたゲームやメディアアプリケーションのデジタル配信の両方をサポートしている。

286回答すべてを表示

Caleb Wininger @calebwininger

評価: 13

1

投稿日: 2011年4月22日

オプション

A/V jack messed up- Screen flickers on and off

My wii keeps losing video/audio. It happens intermittently. I've determinded it's something with the A/V jack on the back of the console. When in "jiggle" the cable at the console connector back and forth the audio/video cuts in and out. Sometimes the video stays on but the colors don't appear correct.

is there an easy fix for this? i'm not afraid of tearing it apart and doing a little solder-work. Just don't know where to start or what to look for...

この質問に回答する同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 1

コメントを追加

1 件の回答

WiseGeek @wisegeek 評価: 1.3千 10 2 4 · Answer 1 · 2011-04-22T16:34:03-07:00

最も参考になった回答

WiseGeek @wisegeek

評価: 1.3千

10

2

4

投稿日: 2011年4月22日

オプション

The first place to start would be the cable itself, it might have a kink in it therefore causing the bad connection. If you hold it in a certain position does the picture and audio come back? That would probably be the simplest way to fix it, but not permanent. Then move on to the connector itself, does it feel more loose than normal? if so, then its most likely a bad soldier joint. One more thing to consider is the contact pins might be bent out of alignment but thats probably not the case. iFixit sells Wii motherboards, but they're a bit pricy. See if you can find a Wii on Ebay for parts, and unsolder the AV connector form the bad one and put it in yours.

Good luck.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

3 件のコメント:

i know the cable is fine. holding it in a certain position will solve the problem. it's the jack for sure. it feels a little loose possibly where it attaches to the motherboard. how tricky would it be to fix the bad solder joint (if that's the issue?)

Caleb Wininger さんによる2011年4月22日

Well, it looks bit tough. However nothing too bad. I count around 15 pins to solder. If you get the right tip, and get really small gauge soldier from radio shack (look for silver soldier) then it wont be that hard.

WiseGeek さんによる2011年4月22日

If you want to see a pic, Nintendo Wii Motherboard look at the back side lower left.

WiseGeek さんによる2011年4月22日

コメントを追加

Nintendo Wii

A/V jack messed up- Screen flickers on and off

1 件の回答

回答を追加する