Skip to main content

MBPro starts but screen dead

Hi!

When I press the start button on my MBPro I hear fans, DVD, HDD rev up and power led behaves as it should, but that's it. I hear no startup chime and the screen doesn't activate at all. I have tried SMC reset, I have tried to start it with power adapter only (adapter is working, I use it on my other MB) and I have checked that the RAM is mounted correctly. I removed the hard drive and connected it to my other MB and it works correctly, so luckily I can do a back up of it. Do any of you have any suggestions what I could try next?

Sincerely

/Fredrik

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

Android 修理キット

交換用スクリーンやバッテリーの修理キット

ショップを見る

Android 修理キット

交換用スクリーンやバッテリーの修理キット

ショップを見る

1 件の回答

Try Hooking it up to an external display. See if you get anything. If not then reset the Pram, when its starting up press ( option-command-p-r) Until you hear two beeps. If that still doesn't work try removing one stick of ram it could be corrupt (but highly unlikely).

Was this answer helpful?

Score 0

コメント:

I'll give it a try. Thanks!

by

No luck :-( External display doesn't react at all, PRAM reset did nothing and I tried with a couple of other RAM sticks that I know are working.

by

Add a comment

Add your answer

Fredrik Lundin will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 743