メインコンテンツにスキップ

モデル番号A1286、発売日 2011年2月/2.0, 2.2もしくは2.3 GHzクアッドコアIntel Core i7プロセッサ

586回答 すべてを表示

Rapidly flashing sleeping light, won't turn on.

Brand-new MacBook Pro (less than one month). It was working fine this morning. I put it to sleep with 10% charge. Now it won't turn on, and the sleep light is flashing. When I plug the charger in, it does not turn to orange - the charger stays green. When I push the battery indicator, it blinks rapidly like its out of battery, but does not indicate charging.

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 5
1件のコメント

Last three of serial number are MGG.

さんによる

コメントを追加

5件の回答

ベストアンサー

Reseat the RAM. For direction on how please give the last three letters of your serial number.

MacBook Pro 15" Unibody Early 2011 RAMの交換

このアンサーは役に立ちましたか?

スコア 8

10 件のコメント:

Last three of serial number are MGG.

さんによる

Apple MacBook Pro "Core i7" 2.2 15" Early 2011 Specs

Identifiers: Early 2011 15" - MC723LL/A - MacBookPro8,2 - A1286 - 2353-1*

If you were adding RAM check it for type and installation. If you've done nothing contact Apple for warranty work.

さんによる

Thanks for the advice! It worked. Same problem! :)

さんによる

Having the same issue, laptop won't turn on to use the keys to reset the ram?

さんによる

then you are not having the same problem, are you?

さんによる

5件以上のコメントを表示

コメントを追加

Apple's website has a lot of solutions. But for this particular issue,You will either need to reseat your battery, clean out the magsafe power connector on your computer, or you will need to reset your PRAM. To do this, Shut down the computer.

Locate the following keys on the keyboard: Command, Option, P, and R.

You will need to hold these keys down simultaneously in step 4.

Turn on the computer.

Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.

Hold the keys down until the computer restarts and you hear the startup sound for the second time.

Release the keys.

Via Apple.com (http://support.apple.com/kb/ht1379)

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

remove the battery then try turning it on connected to the power supply. this is what i do with the school's public laptops when it goes into standby but the light freezes because of the cheap improperly installed ram and wifi/bluetooth devices.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

none of these have worked for me sadly. I’ve reset the PRAM, disconnected the battery, SSD and RAM and reconnected all again correctly. magsafe seems stuck on orange charging light, but the laptop doesn’t seem to be taking any of the charge.

The battery indicator light on the side is flashing (one light, not all five!) quickly, more than 10 times.

Anyone got any other thoughts?

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

With the MagSafe stuck on orange I have found plugging/half plugging repeatedly had worked. Not sure what it is on mine cuz the MagSafe is clean and so is the computer input. Could be a faulty connection.

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Reed さん、ありがとうございました!
統計データ:

過去 24時間: 1

過去 7 日: 15

過去 30 日: 40

今までの合計 89,350