メインコンテンツにスキップ

Model A1418 / Mid 2014 / 1.4, 2.7 & 2.9 GHz Core i5 もしくは3.1 GHz Core i7 プロセッサ

34の回答 すべて表示

iMac EMC2805 Internal Speaker option Missing in Sound Preference Menu

iMac EMC2805 Internal Speaker option missing in Sound Preference Menu I can only see digital output showing. Sound working with Headphone jack, reset SMC, reinstall two macOS version (EL Captain as well as High Sierra) same issue!

Logic Board 820-4668-A faulty??

Please guide what is the solution for the issue?

Block Image

Block Image

Update (08/17/2018)

Sound output from the headphone jack was working, connector from Logic board to headphone jack was disconnected still same condition, Headphone jacket was not available for purchase. We managed to use sound from USB speaker.

Block Image

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

PCラップトップ用バッテリー

iFixitの品質保証付きトップPCブランド用バッテリー

ショップを見る

PCラップトップ用バッテリー

iFixitの品質保証付きトップPCブランド用バッテリー

ショップを見る

2回答

The headphone jack has a switch element within it it looks like that’s broken or messed up some how. Did you plug in a headphone which was an odd length or size? It could have damaged it.

Luckily Apple changed the design so you can replace the jack! It’s just not that easy. You’ll need to take the logic board out to get behind it to remove the jack assembly.

この回答は役に立ちましたか?

スコア 0

コメント:

Sound output from the headphone jack was working, Connector from Logic board to headphone jack was disconnected, still same condition! Headphone jack is not available for purchase. We managed to use sound from USB speaker to get around the issue.

による

コメントを追加

This is the correct behavior! The assumption is if you plug in the headphones (left plugged in) you don’t want the internal speakers to also be active. This is how most PC’s work, and how all Mac systems work. My TV’s and stereo also work this way.

Here’s a closer look on how the headphone jack works

Block Image

The simple act of plugging in the plug breaks the short to the internal speaker lines.

If you want an either or both with the headphones plugged in you’ll need to get your self a pair of wired (using either the headphone jack or USB plug) or wireless Bluetooth speakers (with the headphone jack you’ll need a spitter). You’ll then need to manually to enable which you want on. With Bluetooth the menu bar can be used.

In your case I’m suspecting the switch contacts within the jack are messed up. The easiest way to fix this is to replace the jack iMac 21.5" Headphone Socket and Cable (14/15)

この回答は役に立ちましたか?

スコア 0

コメント:

Hi,

I appreciate your attempt to answer the question...

I understand how the jack works and cutting off the signal to the internal speakers, but if you read my issue again, it's not about that, but the fact I do not have options of sound output to be able to switch between BOTH outputs: Internal Speakers or Headphones without having to pull or insert the plug each time I wish to switch!

Can you answer that?

I am able to have BOTH options available as a switching scenario shown in the Sound Preferences window in the pics I posted? I can on my other machines at work, but not this iMac. Have always had the option on other machines too

による

Post your update in your question here Lost sound from speakers!

による

コメントを追加

回答を追加する

Rajeev Omanakuttan さん、ありがとうございました!
統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 37

今までの合計 119