メインコンテンツにスキップ

2015年9月25日に発売。モデルA1687/A1634。このデバイスの修理は前モデルと似ています。スクリュードライバーとこじ開けるツールが必要です。GSM もしくは CDMA。容量は16、64か128 GB。カラーはシルバー、ゴールド、スペースグレイ、ローズゴールド。

775の回答 すべて表示

Stuck in Bootloop before and after replacing battery

With my 6s+ the battery went from 90% to 1% and restarted itself over and over, and then wouldn't charge. I thought the battery was to blame so I replaced it. It worked good for a day and then its back to 1% and restarting. Now, its stuck in a boot loop were it will go between quickly flashing the backlight and flashing apple logo. Any ideas? Ive tried to restore but it doesn't stay on long enough.

Also, when I first opened the phone 6 months after buying it on eBay, the battery connector cover was missing. I read online it could be the battery sensor. Any ideas?

回答がありました! View the answer 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

iPhone X用修理キット

Warranty up? No worries, we’ve got the fix.

ショップを見る

iPhone X用修理キット

Warranty up? No worries, we’ve got the fix.

ショップを見る

2回答

選択されたソリューション

Try applying some pressure down on the connector while the phone turns on. If it works fine then you just need the metal bracket. If not then you might be missing some components near the battery connector which are commonly knocked off when preforming a battery replacement.

この回答は役に立ちましたか?

スコア 1

コメント:

Thanks! Im going to have it replaced sometime this week.

による

コメントを追加
最も参考になった回答

I think you need the battery connector cover, the battery ribbon cable plug may have a loose connection to the battery connector on the board requiring that metal cover that goes over the battery connector and charging port connector.

iFixit sells the battery connector bracket here:

iPhone 6s Plus Battery Connector Bracket

Here is a guide in case you need it:

iPhone 6s Plusのバッテリーの交換

iPhone 6s Plus Battery Connector Bracket画像

製品

iPhone 6s Plus Battery Connector Bracket

$6.99

この回答は役に立ちましたか?

スコア 2

コメント:

Would this really solve my problem? Ive snapped both connects in tight and it still wont work.

による

If you have tried turning it on while applying pressure to the connection then it won't work.

による

コメントを追加

回答を追加する

Michael N さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 72