メインコンテンツにスキップ

様々なテレビブランドとスタイルの修理ガイドならびにサポート

9046回答 すべてを表示

Tv wont turn on.

Tv was turned off with remote then had no power light that night. Two days later, green light showed then turned red. Turned on tv, light went green, nothing happened and light went off again. Held in buttons as suggested on this site and button showed green then red but when turned on, turned green again and seemed to want to turn on but went off and now no lights showing again. It says it's a AWA 24" FULL HD LCD with built-in DVD Player. Model number: MHDV-2413-03-D0 but AWA hasn't been manufacturing for years.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

2件の回答

最も参考になった回答

@icabod this could b a fun task. Something rare for a challenge ;-) You do want to go ahead and remove the back of your TV. Then take lots of good pictures of all of the boards and the cables etc. Post those with your question so that we can see what you see. Use this guide iFixitでの質問に画像を追加する方法 for that. Check the boards for any obvious damage like domed or leaking capacitors etc. Then you can go ahead with some troubleshooting but you will need a multimeter for that.

Block Image

このアンサーは役に立ちましたか?

スコア 1
コメントを追加

Hi.

1: plug out power connector, mains power, and leave TV with no power for a full night.

Sometimes, RAM or EEPROM needs resetting.

2: Remote has battery?

Hope this helps, if not it its the powersupply or mainboard of the TV.

Best

このアンサーは役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Icabod さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 157