メインコンテンツにスキップ

iPad mini4のWi-Fi対応バージョンの修理ガイドです。モデル番号はA1538。2015年9月9日に発表されました。iPad mini4はiPad mini3の後続モデルです。

97回答 すべてを表示

I turn on my pad and just a flicker is seen on the screen, could it ..

Someone replaced the screen and i added the wake/sleep part to it now it just flickers when i turn it on. Battery has 3.7 v on two legs and 2.4 volts on the other. If they’re not balanced could that be a problem? Also someone pulled hard on connector on the back of theLCD screen/panel and i did a fix to hold it down. Could not find where to get one from to replace it. Any thoughts ? ? Thnaks

回答がありました! 回答を表示 同じ問題があります

この質問は役に立ちましたか?

スコア 0
コメントを追加

1 件の回答

ベストアンサー

Are you referring to the LCD display connector on the board being damaged? That is most likely what is causing the problem, if it's physically damaged you may need to get it replaced via micro-soldering.

このアンサーは役に立ちましたか?

スコア 0

2 件のコメント:

No the one on the back of the LCD screen. I maneuvered a metal clap of sort to press it down to make sure it fully makes contact with the pins underit. I don’t know where i can buy it , it’s not offered on the site.

さんによる

Are you talking about the ZIF connector that connects to the home button on the display board or the ZIF connector that connects to the display on that same board?

The plastic clip lock for the ZIF connector needs to be there or else the pins will not connect properly with a ribbon cable.

さんによる

コメントを追加

回答を追加する

Perry Green さん、ありがとうございました!
統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 51