オプション

Home button flex replaced, touch ID not working

Hi all,

I replaced my home button (long) flex cable and now my touch ID is not working anymore. The home button, the click, is working fine. What could be the problem? The home button is still the original one.

Thanks

回答がありました！ 回答を表示同じ問題があります

この質問は役に立ちましたか？

はいいいえ

スコア 0

コメントを追加

投稿日: 2018年5月2日

オプション

Check both the long home button flex and the short flex on the button itself. Something is broken in that line. It could be a tiny tear in one of the corners or it could be the connectors with a damaged pin. You may need to use magnification as it doesn't take much to cause problems.

If the long flex is damaged, you can replace it. If the Home Button has a damaged flex, it "may" be repairable but generally it is not.

このアンサーは役に立ちましたか？

はいいいえ

スコア 1

4 件のコメント:

So a 'China' long flex should also let the touch ID work with an original home button?

Uas さんによる2018年5月2日

They all come from China :>)

Minho さんによる2018年5月2日

Okay, thank you. But can a long flex cable let the home button touch id work?

Uas さんによる2018年5月2日

Yes it can. The only other causes of touch ID not working are if there is a small enough tear in the home button to only affect touch id, components knocked off of the logic board during disconnection, or a defective extension flex (long flex that runs underneath the LCD shield plate.

Robert Garza さんによる2018年5月2日

コメントを追加

iPhone 6 Plus

Home button flex replaced, touch ID not working

1 件の回答

回答を追加する