メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

2015年3月に発表され、同年4月に発売されたGalaxy S6はGalaxyラインの中で最高のデバイスです。端にカーブが施されたスクリーンはGalaxy S6 Edgeです。

486の回答 すべてを表示

My phone don’t turn on fully after upadate

Hi guys

So I’m recieving this real silly issue about the Samsung logo after an update.

I just keeep reviewing Samsung logo when I turn it on.

This happened directly after updating to the latest version

I have tried using Odin to repair it but every time I received failed rather than pass. I tried a few times around 5 times to receive the same answer.

I was wondering if anyone would be kind enough to help me solve the issue thanks.

Thanks in advance.

この質問に回答する 同じ問題があります

この質問は役に立ちましたか?

スコア 0

コメント:

I’m receiving other issues with my phone now appears with this message. Any help is great.[image|1445494]

さんによる

コメントを追加

The Essential Toolkit

コンパクト版iFixitキットの中で最も利便性の高いツール

ショップを見る

The Essential Toolkit

コンパクト版iFixitキットの中で最も利便性の高いツール

ショップを見る

2件の回答

最も参考になった回答

Are you flashing the correct model firmware and also with matching region code?

You can find your region code by force turning off the phone if it's bootlooping via volume down + power + home for about 10 seconds.

When it goes off immediately hold power + volume up + home then release power when you see the samsung logo.

Keep holding other buttons until you see the light blue recovery screen.

Then wait for a bit and the recovery menu should appear and display some text.

Look for applied multi-csc code: xxx

xxx will be your region code, follow that and you will know which region firmware to download for your phone when you download from Sammobile or Updato.

Also take note of the model number printed on the back of the phone and in ODIN download mode, either should be matching the downloaded firmware model number.

この回答は役に立ちましたか?

スコア 2

コメント:

Hi thanks for the reply I’ll give it a go and try again. maybe I’m just not doing something correctly.

If I need any more help I’ll let you know thanks.

さんによる

I forgot to tell you, if your firmware is too up to date it wont allow flashing of older firmware in some cases.

It will usually not allow you to flash the first few files called sboot due to mismatch security bit or something like that.

What does it error on by the way? Usually I can tell what is causing it.

さんによる

コメントを追加

It’s like right at the end

この回答は役に立ちましたか?

スコア 0
コメントを追加

回答を追加する

Rakesh さん、ありがとうございました!
統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 35